How To Light Pilot On Gas Fireplace With Remote. Push and rotate the black or green valve control knob. If your pilot light does not ignite, wait a few seconds and try again.
Ensure that the receiver is away from the gas valve. Millivolts that close and open your gas valve. Unless the gas is physically turned off, the pilot light will be on.
How Do I Turn On My Gas Fireplace?
How to light the pilot in the heatilator gas fireplace. Follow these steps to light the heatilator gas fireplace’s pilot: How to light or relight a pilot on a gas fireplace, insert or stove.
* If You Do Not See A Red Or Black Spark Ignitor Button, You Do Not Have A Manual Ignition System.
Ensure that the receiver is away from the gas valve. If power is actively supplied to your fireplace, simply turn the on/off. If there’s a battery backup, the pilot light could be on without any gas going to the fireplace.
Turn The Safety Control Valve Knob To The Pilot Position.
Assure the pilot is still burning and turn the knob to the “on” position. Push the igniter button once every second until it lights. The great thing about a gas fireplace is that it is easy to light and works quickly to heat up your home.
First, Turn Your Gas Fireplace’s Knob From The “Off” To The “Pilot” Position.
Remember to do this when you are ready to ignite the pilot light of your gas fireplace. Similarly, you may ask, how do you light a pilot light on a montigo fireplace? While pressing down the control knob in the pilot position, press the ignition switch.
If You Keep The Fireplace Switch In The On Position, The Receiver Will Stay On Until You Slide It To The Remote Or Off Position.
Continue pressing down on the knob, and press on the ignition switch at least once every second. Gas fireplaces with electronic ignition will typically have a way to light it in the form of a wall switch and/or a remote control. Before the remote can work, the master switch must be in the “on” position on the fireplace.